|
|
Series
69 |
□ Series
68 supplied as control boards without plastic housing |
|
|
Series
69 |
□ Series
68 supplied as control boards without plastic housing |
Series 69 controls are similar to series 68 but are supplied
as control boards without a plastic housing and are designed for sub-panel
mounting with remote set potentiometer.
Series 68 is available, without enclosure, for
internal mounting in 5A or 30 mA control output versions for thermistor input
sensor. Specify 69- instead of 68-. Series 69 is supplied with separate
potentiometer assembly and wiring harness for mounting remote from the
control. Potentiometer/harness assembly is ordered separately
Standard Series 69 which are available
See Technical Information – Analog part numbers for specifying other
versions of Series 69
|
Model # |
Power |
Sensor |
Range |
Control |
Ouptut |
Set pot |
|
69-A21-R411 |
120/240V |
Thermistor |
200/500F |
On/off |
Relay 5A |
Remote |
|
69-A21-RZ028-B |
120/240V |
RTD |
300/550F |
On/off |
Relay 5A |
Remote |
|
69-A61-RZ027-B |
120/240V |
RTD |
300/550F |
On/off |
SSR 0-12VDC |
Remote |
|
69-A81-RZ418 |
120/240V |
Thermistor |
80/125F |
On/off |
Relay 10A |
Remote |
|
69-A81-RZ419 |
120/240V |
Thermistor |
80/180F |
On/off |
Relay 10A |
Remote |
Harness assemblies for Series 69 controls
|
Part number |
Item |
|
220-21015-01 |
Set pot assembly with 22AWG stranded PVC insulated leads
(3) and 220-20063-02 Potentiometer 1K ohm with 7.68K resistor, with shaft
0.156 diameter x 0.47 high. Lead length 12in. ¼ QC terminals. |
|
220-21015-02 |
Set pot assembly with 22AWG stranded PVC insulated leads
(3) and 220-20063-02 Potentiometer 1K ohm resistor, with shaft 0.156
diameter x 0.47 high. Lead length 12in. ¼ QC terminals. |
|
220-21015-03 |
Set pot assembly with 22AWG stranded PVC insulated leads
(3) and 220-20063-02 Potentiometer 1K ohm with 7.68K resistor, with shaft
0.156 diameter x 0.47 high. Lead length 12in. ¼ QC terminals. |
|
220-21030-01 |
Set pot assembly with 22AWG stranded PVC insulated leads
(3) and 220-20059-01 Potentiometer 10K ohm with 7.68K, with shaft 0.156
diameter x 0.47 high. Lead length 12in. ¼ QC terminals. |
Quantem Corporation
Bulletin # Series 69/8/2002
Printed in