|
|
Series
10 Analog Electronic Controls
Single or double output with analog and digital display outputs
|
□ Select
analog or digital display output
□
Relay or solid
state outputs
□
RTD, Thermistor
or Thermocouple inputs
|
□ Single or double output capability
□ on/off or time proportioning
□ Compact and economical
Series
10 offers state-of-the-art technology to provide single or dual stage control
(two independent outputs). Ultra reliable on/off or time proportioning for
heating or cooling applications to drive contactors, solid-state relays or
triacs. Two channel heating/cooling to maintain tight process temperatures.
Ideal for ovens, mold controllers, environmental chambers. Use one channel for
boost heat and the other for maintaining set point, for example in large power
drying systems.
These
versatile controllers will accept thermistors, RTD's or thermocouples types J
and K. Choose temperatures between -100 and +1000 degrees C. In addition, an
auxiliary output is provided for add-on temperature indication - analog (0-1
mA DC), digital (12 VDC or 5VDC) and deviation meter (5 VDC).
A
low cost effective alternative to DIN packaged controllers, Series 10 comes
complete with local or remote set potentiometers and with handsome 2.25in
skirted knob and scale calibrated in degrees C and F.
Series 10 provides six different output
modes
|
Function
|
Description
|
Code
|
|
Heating
|
Driving contactors, solid state relays or triacs to
regulate a heating process
|
A
|
|
Cooling
|
Driving solenoids to regulate a refrigeration process
|
B
|
|
Heating/cooling (tracking)
|
Two independent relay or triac outputs for driving
contactors (solid state relay or triacs) and simultaneously solenoids to
maintain tight process temperatures. Ideally suited for film processing,
one, mold controller and environmental chamber applications
|
C
|
|
Two stage heating
|
Two independent tracking and non-tracking outputs similar
to above but suited for two stage heating systems, typically a high
powered heater for raising process temperature quickly and a low power
heater for maintaining set point temperature (for example, large power
drying systems)
|
D
|
|
Heating/Hi Alarm
|
Two non-tracking outputs for regulating a heating process
and providing a switching signal to activate a high temperature alarm
|
E
|
|
Heating/ Lo Alarm
|
Similar
to above, but designed to activate an alarm below set-point
|
F
|
On-off or time
proportioning control
On-off
controls are either full on or full off. The controlled element is switched at
precisely the selected set point. The factory set hysteresis is typically ±0.25°C but controllers can be supplied with wider or narrower dead
bands.
The
control recognizes the deviation from set point and proportions corrective
action as a function of the temperature deviation. The action takes place when
the temperature falls within a preset temperature range around the set point
known as the proportioning band. The controller progressively reduces or
increases the ratio of time-on to time-off until temperature equilibrium is
reached. Power is switched on and off with full line cycles to minimize radio
frequency interference.
Output ratings
For
inductive or alarm applications, relay outputs are suggested. For
resistive heating applications. triac outputs are suggested. The triac output
can also drive and externally mounted triac when load requirements exceed the
controller output rating. See Quantem P/N 212-70038 25A Triac “Quick-Pak”.
|
SPECIFICATIONS
|
SERIES 10
|
|
Temperature ranges available
|
Thermistor: -20/100C 2K ohm, 25/175C 30K ohm, 50/250C 100K
ohm, 100/325C 500K ohm
RTD: -100/100C 100 ohm, 0/250C 100 ohm, 0/400C 100 ohm, 0/600C 100 ohm
Thermocouple: 0/250C, J, 0/500C, J, 0/1000C, K
|
|
Stability:
|
0.05 deg C with 1 deg C ambient change or 0.01% of span
with 1% line voltage change
|
|
Accuracy:
|
0.25% FS
|
|
Control type:
|
On/off or time proportioning (one or two channels)
|
|
Control output:
|
SPDT relay (3A or 10A), triac (2A, 10A or 15A), 30mA
external SSR, dual relay (3A), dual triac (2A)
|
|
Output type:
|
(Single output) heating, cooling; (Dual output) heat/cool,
heat/heat, heat/high limit, heat/low limit, high/low alarm
|
|
Set potentiometer:
|
Fixed, local or remote
|
|
Sensor:
|
Thermistor, RTD or thermocouple (J/K)
|
|
Operating ambient:
|
0-55 deg C
|
|
Power:
|
120/240VAC (field selectable)
|
|
Auxiliary output signal
|
None, analog (0-1 mA DC), digital LCD (12VDC), digital
LED/LCD (5VDC), deviation (1 mA DC)
|
|
Panel cut-out:
|
Sub-panel mount, potentiometer shaft 3/8in diameter
|
|
Included as standard:
|
220-20001 Potentiometer, 221-10027 Knob/scale 2.25in
|
Series
10 can be provided optionally with an output for a digital temperature
indicator. For more details of our indicators see Model TR-25.
Standard
Series 10 which are available
See Technical Information – Analog part numbers for specifying other
versions of Series 10
|
Model #
|
Power
|
Sensor
|
Range
|
Control
|
Output
|
Set pot
|
|
10-A04-10-LZ006
|
240V
|
RTD
|
85/135F
|
On/off
|
10A relay
|
Local
|
|
10-A04-10-RZ055
|
240V
|
RTD
|
85/135F
|
On/off
|
10A relay
|
Remote
|
|
10-A04-20-RZ027
|
120/240V
|
RTD
|
No
dial/range
|
Proportional
|
10A relay
|
Remote
|
|
10-A04-20-RZ033
|
120/240V
|
RTD
|
200/600F
|
Proportional
|
30mA
|
Remote
|
|
10-A06-24-RZ037
|
120V
|
RTD
|
0/1000C
|
Proportional
|
10A relay
|
Remote
|
|
10-A08-10-RZ012
|
120/240V
|
RTD
|
-100/100C
|
On/off
|
10A relay
|
Remote
|
|
10-C10-60-R502
|
120/
240V
|
RTD
|
-100/100C
|
Proportional
|
3A
relay
15A triac
|
Remote
|
Dimensions
Quantem Corporation
1457 Lower Ferry Road
,
Trenton
,
NJ
08618
Telephone 609-883-9191, Fax 609-883-9879. www.quantemcorp.com
Bulletin # Series10/8/2002
Printed in
USA